How to Fix Windows 10 Sleep Mode Not Working Error?

Windows 10 Sleep Mode Not Working Error

Windows 10 Sleep Mode Not Working Error is a frustrating problem that can occur in a variety of situations. This can be caused by a range of issues, including driver conflicts, power settings, and software conflicts. Fortunately, this issue is usually fixable and can be resolved by following a few troubleshooting steps.

Step to Fix Windows 10 Sleep Mode Not Working:

1. Update Your Drivers: First, make sure you have the latest drivers installed for your hardware components, especially your graphics card. Outdated drivers can cause issues with sleep mode.
2. Check Power Settings: Go to the Control Panel > Power Options and check that your current power plan is set to allow Sleep mode.
3. Disable Hibernate Mode: If you are using Hibernate mode, try disabling it and see if that helps. To do this, go to the Control Panel > Power Options > Hibernate and uncheck the box to disable it.
4. Run Power Troubleshooter: Windows includes a built-in tool to troubleshoot and fix common power-related issues. To access it, go to the Control Panel > Troubleshooting > Power and run the troubleshooter.
5. Disable Wake Timers: In some cases, wake timers can prevent your computer from entering sleep mode. To disable them, open the Command Prompt and type “powercfg -waketimers” and press Enter.
6. Check for Malware: Finally, you should make sure that your computer is not infected with any malware or viruses. Scan your system with a good antivirus program to make sure it’s clean.

How Can I Fix Windows 10 Sleep Mode Issues?

The first step to troubleshooting this issue is to determine what is causing the issue in the first place. One of the most common causes is a conflict between the system's power settings and the hardware. To check this, you can open the Power Options section in the Control Panel and make sure that the correct settings are selected. You should also make sure that the Sleep Mode settings are enabled.

Another potential cause of the Windows 10 Sleep Mode Not Working Error is a driver conflict. This means that one of the device drivers installed on your system is not compatible with the system's power settings. To check for driver conflicts, you can open the Device Manager and look for any devices with yellow exclamation marks. If you find any, you can uninstall the driver, scan for hardware changes, and then reinstall the driver.

If you find that neither of these approaches solves the problem, then you can try to reset the system's power settings. To do this, you can open the Control Panel and click on the Power Options icon. Then, select the Change Plan Settings option and then choose the Restore Default Settings option. Once the settings have been reset, you should try to put your system into Sleep Mode again.

If the issue persists, then you may need to look into software conflicts. If you have recently installed any new software, then it is possible that it is conflicting with the system's power settings. You can try to uninstall the software, restart your computer, and then reinstall it. Alternatively, you can try to temporarily disable the software and then put your system into Sleep Mode.

If none of these approaches resolves the Windows 10 Sleep Mode Not Working Error, then you may need to look into updating the system's BIOS. This can be done by downloading the latest BIOS file from the manufacturer's website and then flashing it onto the system. This process should be done with caution, as it can cause further damage to the system if done incorrectly.

Finally, if none of the above approaches work, then you may need to consider resetting the system to its factory settings. This will erase all installed software and settings, and you will need to reinstall all of your applications and data. This should be done as a last resort, as it is a potentially destructive process.

By following the above steps, you should be able to fix the Windows 10 Sleep Mode Not Working Error. If the issue persists, then you may need to seek help from a qualified technician. With the right knowledge and tools, they should be able to diagnose the issue and provide a solution. Connect with the Supportly App if you require additional support.